Counties, Towns & Villages
Master Planning
Future planning for multiple phase developments or renovations
Water and Sanitary Sewer System Design
Utility infrastructure to bring clean water into your place or removal of wastewater. Connect utilities from public infrastructure to private usage.
Green Infrastructure Design
The development of systems that uses a water management approach to ensure natural water cycle.
Roadway Design
Plan and profile of drive paths including a cross-section, striping, and a pavement section to ensure longevity
Streetscape Design
The development of urban roadway and walking paths that utilizes green infrastructure to enhance the surrounding aesthetics.
Engineering Services During Construction
Review of plan sets, on site discussions, material review, RFI response, and SWPPP inspections
Feasibility Studies/Site Engineering Concepts
Research for utility options, site access, existing land use, development of basic strategy to have a function site.
Preliminary Plan Approval
Plan set development, interactive layout and updates to meet client needs, discuss with local authority, and submit for general review to agencies who have jurisdiction.
Drainage Analysis
Stormwater runoff location and volume.
Detention/Retention Basin Design
Development or redevelopment of above or below ground stormwater mitigation features.
One and Two-Dimensional Floodplain Mapping
Using software and applicable regulated design procedures to provide mapping services for watersheds small and large.
Open Channel Design and Modeling
Design using AutoCAD Civil 3D and hydraulics and hydrology modeling software to understand existing and proposed conditions of water conveyances.
Detailed Hydrologic and Hydraulic Modeling
Understanding the characteristics of how water moves to a specific location and how it flows through manmade structures.
Innovative Stormwater Management
The design using advanced techniques when appropriate meanwhile value engineering full system solutions.
Parking Capacity Studies
Using local authority requirements and designing or redesigning layouts to meet current or future needs of the client
Parking Lot and Circulation Design
Providing options for parking and drive isles while maintaining adjacent lots or streets.
Site Grading & Earthwork Balance
Minimizing trucking needs for a site where appropriate. Reducing the machinery time on property by reducing cut and fill on site.
Temporary and Permanent Erosion and Sediment Control Design
The layout of acceptable erosion and sediment movement on site through silt fence, bio logs jersey barriers, etc.
Preparation of Stormwater Prevention Pollution Plan (SWPPP)
Development of plans and report to ensure it meets local authority requirements.
Final Construction Plans and Permitting
Development of plans and specifications for construction. Follows permitting and is utilized by contractor to build from.
Expert Witness/Condemnation Review
Research through measurements and calculations to develop reports explaining situation.
Solar Facility – 1MW to 250 MW
Design and development of site plans for civil aspect to solar facilities.
NYC Sewer Permit Renewals
Application and plan for New York City buildings.
Athletic Fields and Multi-Use Fields
Design and layout of fields natural and synthetic turf.
Zoning/Change of Use
A plan set and application required for submittal to local authorities to change the current zone of a property.
Variance Application
An allowance that deviates from the current required code. This may be for setback from property line, parking lot layout, driveway route, utility routing, etc.
Survey Services
- Easement Preparation: The language explaining a specific area for access through another property.
- Record Survey: The review of historical lot sales to explain the property owned.
- Subdivision Platting: Layout and application pertaining to divided one lot into multiple lots.
- Section Corner Recovery and Monumentation
- Aerial Mapping: Using drones to provide site information which are correlated with known ground features.
- Tree Surveys: Review of tree type and circumference and located in field.
- Bathymetric: Detailed items including physical features and characteristics.
- ALTA: The design and application of a deck to local authorities. Starting with design and hanging off to contractor to build the deck.
- Boundary: Connected property lines using known points in the field or previous deeds.
- Construction Staking: using engineering designs to coordinate building anything outside. This may include underground items such as sanitary sewer placement and water mains to above ground items like building corners and adjacent pavement edges.
- Right-of-Way (ROW): Access location between two properties. Typically used for utilities or driveways.
- Topographic: Information for elevation data to understand angulations in ground surface.
- Title: Detailed investigation of land parcel that correlates land features to understand the full extents of the owned land.